Skip to main content
English
Japanese

Translating step 1

Step 1
The screw marked in orange is directly screwed into the chassis. This point WILL break if overtightended. To remove the hard drive from the computer, remove the two screws. Use the Phillips #1 bit. To remove the hard drive from the computer, remove the two screws. Use the Phillips #1 bit.
Remove the chassis screws
  • The screw marked in orange is directly screwed into the chassis. This point WILL break if overtightended.

  • To remove the hard drive from the computer, remove the two screws. Use the Phillips #1 bit.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.