Skip to main content

Fix Your Stuff

Right to Repair

Store

English
French

Translating step 1

Step 1
Remove eleven 7.23mm Phillips #1 screws from the back panel.
  • Remove eleven 7.23mm Phillips #1 screws from the back panel.

  • Using a spudger, carefully separate back panel from main body.

  • The back panel is still attached to the main body by a ribbon cable. Use care not to damage the cable.

Retirez onze vis Phillips n ° 1 de 7,23 mm du panneau arrière.

À l’aide d’un spudger, séparez soigneusement le panneau arrière du corps principal.

Le panneau arrière est toujours attaché au corps principal par un câble ruban. Veillez à ne pas endommager le câble.

Your contributions are licensed under the open source Creative Commons license.