Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 11 guides that include this step.

English
Japanese

Translating step 1

Step 1
The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.
  • The home button assembly is attached to the front panel with some adhesive. The use of an iOpener to soften the adhesive is highly recommended.

  • Place the iOpener in the microwave and microwave it for thirty seconds on the highest power setting.

  • Be careful not to overheat the iOpener during the repair procedure. We recommend waiting at least three minutes before reheating the iOpener.

  • Place the iOpener over the home button on the front edge of the display.

ホームボタンアセンブリは接着剤でフロントパネルに固定されています。温めたiOpenerを使って接着剤を柔らかくしてください。

iOpenerを電子レンジに入れて約30秒温めます。

iOpenerをオーバーヒートしないようにご注意ください。再度iOpener を温める場合は少なくとも3分間、間隔を開けてください。

iOpener をディスプレイの正面端にあるホームボタン上に載せます。

Your contributions are licensed under the open source Creative Commons license.