Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
Japanese

Translating step 7

Step 7
Remove the following screws from the headphone jack assembly: Five 2.6 mm Phillips #0 Two 2.2 mm Wide Head Phillips #00
  • Remove the following screws from the headphone jack assembly:

  • Five 2.6 mm Phillips #0

  • Two 2.2 mm Wide Head Phillips #00

  • Two 2.6 mm Phillips #00

  • These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.

ヘッドホンジャックアセンブリから次のネジを外します:

2.6mm #0プラスネジ 5本

2.2mm #00プラスネジ(大) 2本

2.6mm #00プラスネジ 2本

これらのネジは、アルミニウム製フレームに対して斜めになっています。ネジをなめないよう、ネジとドライバーが合わさっているか確認してください。

Your contributions are licensed under the open source Creative Commons license.