Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
Japanese

Translating step 3

Step 3
Using the flat end of a spudger, pry the front-facing camera off of its socket on the headphone jack assembly. Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable. Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable.
  • Using the flat end of a spudger, pry the front-facing camera off of its socket on the headphone jack assembly.

  • Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable.

スパッジャーの平面側先端を使って、ヘッドホンジャックアセンブリ上のソケットから正面カメラを持ち上げます。

スパッジャーを取り外さずに、スパッジャーを右側にスライドして、カメラケーブルを留めている接着剤を解放します。

Your contributions are licensed under the open source Creative Commons license.