Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

English
German

Translating step 3

Step 3
Using the flat end of a spudger, pry the front-facing camera off of its socket on the headphone jack assembly. Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable. Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable.
  • Using the flat end of a spudger, pry the front-facing camera off of its socket on the headphone jack assembly.

  • Without removing the spudger, slide the spudger to the right, releasing the adhesive holding down the camera cable.

Heble die Frontkamera mit dem flachen Ende eines Spudgers aus ihrer Fassung auf der Kopfhörerbuchsen Einheit.

Ohne den Spudger zwischendurch zu entfernen, fahre ihn nach rechts und löse den Kleber, der das Kamerakabel an Ort und Stelle hält.

Your contributions are licensed under the open source Creative Commons license.