Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
French

Translating step 1

Step 1
Remove the following seven screws securing the logic board to the rear aluminum panel.
  • Remove the following seven screws securing the logic board to the rear aluminum panel.

  • Six 2.1mm Phillips #00

  • One of these screws, at the top of the logic board, is tucked beneath the headphone jack assembly cable. Take care to hold the cable out of the way while removing and replacing this screw.

  • One 2.5mm Phillips #00

Retirez les sept vis suivantes, fixant la carte mère à la coque arrière en aluminium.

Six vis cruciformes #00 de 2,1 mm

Une de ces vis, en haut de la carte mère, est repliée sous la nappe de la prise casque. Veillez à ce que la nappe soit de côté quand vous retirez et remplacez cette vis.

Une vis cruciforme #00 de 2,5 mm

Your contributions are licensed under the open source Creative Commons license.