Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 2

Step 2
Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the auxiliary charging base. Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the auxiliary charging base.
  • Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the auxiliary charging base.

Insert translation here

Your contributions are licensed under the open source Creative Commons license.