Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 1

Step 1
Unclip the orange ribbon cable located above the battery using the Blunt ESD Tweezer. Remove the four black 3mm screws using a PH000 Phillips screwdriver. Remove the four black 3mm screws using a PH000 Phillips screwdriver.
  • Unclip the orange ribbon cable located above the battery using the Blunt ESD Tweezer.

  • Remove the four black 3mm screws using a PH000 Phillips screwdriver.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.