Skip to main content

Nintendo Switch Teardown

Translating step 10

English
Korean
Step 10
Nintendo Switch Teardown: step 0, image 1 of 3 Nintendo Switch Teardown: step 0, image 2 of 3 Nintendo Switch Teardown: step 0, image 3 of 3
  • This is a well-connected motherboard; to get it free, we pop off the digitizer, backlight, and speaker connectors, two antennas, and the two Joy-Con rails. And then remove six Phillips screws.

  • But hey, that's some awesome modularity. Even the eMMC storage pops off with an independent PCB!

  • Nintendo made a 6.2" tablet with removable flash storage, so don't say it can't be done.

  • The storage board contains a single Toshiba THGBMHG8C2LBAIL 32 GB eMMC NAND Flash IC.

  • Sadly, the modularity ends at the USB-C port. This high-wear component will require some intense soldering skills to replace.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.