Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 20

Step 20
A rubber gasket on the bottom of the Lightning connector protects your iPhone from liquid and dust intrusion. If you are installing a new Lightning connector assembly, you may need to carefully remove and transfer the gasket to the new part. The small adhesive patch on the bottom of each microphone also protects your iPhone from liquid and dust intrusion. For best results, replace the two adhesive patches before installing your Lightning connector assembly. The small adhesive patch on the bottom of each microphone also protects your iPhone from liquid and dust intrusion. For best results, replace the two adhesive patches before installing your Lightning connector assembly.
  • A rubber gasket on the bottom of the Lightning connector protects your iPhone from liquid and dust intrusion. If you are installing a new Lightning connector assembly, you may need to carefully remove and transfer the gasket to the new part.

  • The small adhesive patch on the bottom of each microphone also protects your iPhone from liquid and dust intrusion. For best results, replace the two adhesive patches before installing your Lightning connector assembly.

Eine Gummidichtung unten am Lightning Verbinder schützt dein iPhone vor Staub und Feuchtigkeit. Wenn du eine neue Lightning Connector Einheit einbaust, musst du vorsichtig diese Dichtung entfernen, und auf die neue Einheit übertragen.

Genauso schützt ein kleiner Aufkleber unten an jedem Mikrofon das iPhone vor Staub und Feuchtigkeit. Du solltest deswegen auch diese beiden Aufkleber ersetzen, bevor du die Lightning Connector Einheit einbaust.

Your contributions are licensed under the open source Creative Commons license.