Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

Back to Guide
English
French
Previous step Next step

Translating step 3

Step 3
Using a Tri-Point YO Screwdriver, remove the two 4.1mm Tri-Wing screws. Place the removed screws in a location similar to where you placed the pads that you removed in the previous step. Place the removed screws in a location similar to where you placed the pads that you removed in the previous step.

  • Using a Tri-Point YO Screwdriver, remove the two 4.1mm Tri-Wing screws.

  • Place the removed screws in a location similar to where you placed the pads that you removed in the previous step.

À l'aide d'un tournevis Tri-Point YO, retirez les deux vis Tri-Wing de 4,1 mm.

Placez les vis retirées dans un endroit similaire à celui où vous avez placé les pads que vous avez retirés à l'étape précédente.

Your contributions are licensed under the open source Creative Commons license.