Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 8 guides that include this step.

English
Chinese

Translating step 1

Step 1
Wedge a plastic opening tool into the lower right corner of the Kindle Fire. Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other. If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger to undo the first clip, then switch back to the opening tool to avoid scratching your case.
  • Wedge a plastic opening tool into the lower right corner of the Kindle Fire.

  • Pry the case apart and run the plastic opening tool along the perimeter of the Kindle Fire to release the clips securing the case halves to each other.

  • If you are having extreme difficulty inserting the plastic opening tool, carefully use a metal spudger to undo the first clip, then switch back to the opening tool to avoid scratching your case.

  • It is helpful to pry the bottom of the Kindle Fire away (and out from the side) from the top part. Exerting too much force attempting to split the two without pulling away can cause the tabs on the inside to crack.

在Kindle Fire右下角处楔一个塑料打开工具。

撬开外壳,沿着Kindle Fire的周围撬动塑料开口工具,释放夹子,使两个外壳相互分离。

如果插入塑料开口工具极其困难,请小心使用金属撬棒拆开第一个夹子,然后切换回开口工具以避免划伤您的外壳。

从顶部撬开Kindle Fire的底部(从侧面)是有帮助的。 使用蛮力可能会导致内部的标签破裂。

Your contributions are licensed under the open source Creative Commons license.