Describe the specific part or component of this device you're working on. Ex: Battery
Create a title.
This brief summary will only appear in search results.
Communicate background information before the reader dives into the guide.
Step 1
Remove the battery / battery as described in the previous tutorial. Basically prying with a flat screwdriver and carefully
Step 2
With a hairdryer, heat the "plastic" and pull it little by little with your hand so as not to break it.
Step 3
Once the plastic was out, we access the screws.
Step 4
Unscrew the 28 self-tapping "PHILLIPS" screws. I have the habit of placing them in the same order that I take them out so as not to make mistakes when I return.
Step 5
Carefully pry the tabs around the body of the keyboard. Between the keys F8 and F9 there is another tab. To open it, lift a little from below and pry with the screwdriver as if screwing or unscrewing.
Step 6
With the steps above we would have the middle keyboard disassembled. To reassemble it, follow the same steps in reverse. Careful with the plastic, the first time I hit a little off center and I had to take it off again and paste it, to center it well.
Your contributions are licensed under the open source Creative Commons license.