Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 2

Step 2
Remove the following three screws securing the fan to the upper case:
  • Remove the following three screws securing the fan to the upper case:

  • Two 5 mm Phillips screws.

  • One 7 mm Phillips screw.

  • The longer of the three screws belongs in the upper left corner of the fan.

Entferne die folgenden drei Schrauben, die den Lüfter mit dem oberen Gehäuse verbinden:

Zwei 5 mm Kreuzschlitzschrauben.

Eine 7 mm Kreuzschlitzschraube.

Die längere der Schrauben gehört in die obere linke Ecke des Lüfters.

Your contributions are licensed under the open source Creative Commons license.