Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 13 guides that include this step.

English
Spanish

Translating step 1

Step 1
Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. These screws will remain captive in the access door.
  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • These screws will remain captive in the access door.

  • Remove the access door from your iMac.

  • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Afloja los tres tornillos Phillips que sujetan la tapa de acceso al extremo inferior de tu iMac.

Estos tornillos permanecerán cautivos en la tapa de acceso.

Quita la tapa de acceso de tu iMac.

Durante el reensamblaje, cierra la tapa de acceso sin apretar y alíneala con la ranura en la caja externa del iMac antes de ajustar los tornillos completamente.

Your contributions are licensed under the open source Creative Commons license.