Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 8

Step 8
Using a spudger, pry the battery up from the adhesive holding it to the battery shield. Start prying at the upper right corner of the battery and work your way around the perimeter until the battery has lifted enough to grab it with your fingers.
  • Using a spudger, pry the battery up from the adhesive holding it to the battery shield.

  • Start prying at the upper right corner of the battery and work your way around the perimeter until the battery has lifted enough to grab it with your fingers.

  • Remove the battery from the battery shield.

Usando uno spudger, fai leva sulla batteria per separarla dall'adesivo che la fissa alla sua protezione.

Inizia a fare leva sotto l'angolo in alto a destra della batteria e continua lungo il perimetro finché si è sollevata abbastanza da poterla prendere con le dita.

Rimuovi la batteria dalla sua protezione.

Your contributions are licensed under the open source Creative Commons license.