Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
Dutch

Translating step 3

Step 3
The fan affixed to the back plate is connected to the logic board. A small wire must be detached to fully remove the back plate. Pull the base of the wire close to the logic board and the connector will pop off.
  • The fan affixed to the back plate is connected to the logic board. A small wire must be detached to fully remove the back plate.

  • Pull the base of the wire close to the logic board and the connector will pop off.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.