Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Spanish

Translating step 3

Step 3
Disconnect the front panel sensor assembly connector from its socket on the logic board. This press connector should also be reconnected one end at a time to minimize the risk of bending.
  • Disconnect the front panel sensor assembly connector from its socket on the logic board.

  • This press connector should also be reconnected one end at a time to minimize the risk of bending.

Desconecta el conector del conjunto del sensor del panel frontal de su zócalo en la placa lógica.

Este conector de prensa también debe reconectarse de un extremo a la vez para minimizar el riesgo de flexión.

Your contributions are licensed under the open source Creative Commons license.