Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Dutch

Translating step 2

Step 2
Remove the three tri-point Y000 screws securing the bracket over the front panel sensor assembly connector: One 1.3 mm screw Two 1.0 mm screws
  • Remove the three tri-point Y000 screws securing the bracket over the front panel sensor assembly connector:

  • One 1.3 mm screw

  • Two 1.0 mm screws

  • Remove the bracket.

Verwijder de drie tri-point Y000 schroeven die het plaatje bovenop de aansluiting van de sensormodule in het voorste paneel bevestigen:

Eén 1.3 mm schroef

Twee 1.0 mm schroeven

Verwijder het plaatje.

Your contributions are licensed under the open source Creative Commons license.