Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Back to Guide
English
German
Previous step Next step

Translating step 2

Step 2
Remove the three tri-point Y000 screws securing the bracket over the front panel sensor assembly connector: One 1.3 mm screw Two 1.0 mm screws

  • Remove the three tri-point Y000 screws securing the bracket over the front panel sensor assembly connector:

  • One 1.3 mm screw

  • Two 1.0 mm screws

  • Remove the bracket.

Entferne die drei Dreipunkt Y000 Schrauben, mit denen die Abdeckung über der Buchse für den Sensor des Front Panels befestigt ist.

Eine 1,3mm Schraube

Zwei 1,0mm Schraube

Entferne die Abdeckung.

Your contributions are licensed under the open source Creative Commons license.