Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Chinese

Translating step 7

Step 7
Remove the home/Touch ID sensor assembly by lifting it through the front side of the display.
  • Remove the home/Touch ID sensor assembly by lifting it through the front side of the display.

  • To reinstall, first feed the cable through the hole in the front of the display.

  • Your replacement part may come with an extra Y000 screw already installed right of the Home Button. Remove the unnecessary screw so that you can reinstall the home button bracket.

  • Follow this guide to install replacement display adhesive on your screen.

卸下Home/Touch ID传感器组件。

要重新安装,请首先将电缆穿过显示屏正面的孔。

你的更换配件可能随附有 Home 键右侧的Y000额外螺丝。卸下不必要的螺丝,以便你可以重新安装 Home 键支架。

请按照本指南在屏幕上安装替换显示器粘合剂。

Your contributions are licensed under the open source Creative Commons license.