Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Spanish

Translating step 5

Step 5
Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.
  • Heating the area around the home/Touch ID sensor will help soften the adhesive holding its delicate cable in place, making it easier to remove safely.

  • Flip the display assembly over. Use a hairdryer or prepare an iOpener and apply it to the lower edge of the display for about 90 seconds in order to soften up the adhesive underneath.

Al calentar el área alrededor del sensor de inicio / ID Táctil ayudará a suavizar el adhesivo que sostiene su cable delicado en su lugar, lo que facilita la extracción segura.

Da la vuelta al ensamblaje de la pantalla. Usa un secador de pelo o prepara un iOpener y aplícalo al borde inferior de la pantalla durante aproximadamente 90 segundos para suavizar el adhesivo que se encuentra debajo.

Your contributions are licensed under the open source Creative Commons license.