Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Italian

Translating step 3

Step 3
Pry under the left edge of the home button cable connector to disconnect it from its socket. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Stacca, spingendolo a destra, la spina del pulsante home per disconnetterlo dal suo zoccolino sul cavo di interconnessione.

Se l'intero connettore inizia a sollevarsi ma non si stacca, premi con la parte piatta del tuo spudger sul cavo in corrispondenza del bordo superiore del connettore, mentre allo stesso tempo sollevi il bordo sinistro del connettore. Stai attento a non danneggiare il cavo o il connettore, perché potresti disabilitare permanentemente il sensore.

Your contributions are licensed under the open source Creative Commons license.