Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 3

Step 3
Pry under the left edge of the home button cable connector to disconnect it from its socket. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor. If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Löse das Home / Touch ID Sensorkabel, indem du den Pressanschluss vorsichtig aufhebelst.

[* black] DisconnectPry under the home/Touch ID sensorleft edge of the home button cable by carefully prying openconnector to disconnect it from its presssocket.
[* icon_caution] If the entire connector begins to flip up without separating, [https://d3nevzfk7ii3be.cloudfront.net/igi/YCREWlQsUNsbXdMn.full|press down on the cable at the top edge of the connector with the flat of your spudger|new_window=true], while simultaneously prying up the left edge of the
connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.
[* black] DisconnectPry under the home/Touch ID sensorleft edge of the home button cable by carefully prying openconnector to disconnect it from its presssocket.
[* icon_caution] If the entire connector begins to flip up without separating, [https://d3nevzfk7ii3be.cloudfront.net/igi/YCREWlQsUNsbXdMn.full|press down on the cable at the top edge of the connector with the flat of your spudger|new_window=true], while simultaneously prying up the left edge of the
connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Your contributions are licensed under the open source Creative Commons license.