Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
  • Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

  • One 1.1 mm screw

  • Three 1.3 mm screws

  • During reassembly, be careful not to overtighten these screws, or your home button may not work.

Home/Touch ID センサー上のブラケットから次のY000ネジを4本外します。

1.1 mmネジー1本

1.3 mmネジー3本

再組み立ての際は、これらのネジを締めすぎないようにご注意ください。ホームボタンが機能しない場合がありあす。

Your contributions are licensed under the open source Creative Commons license.