Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
  • Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

  • One 1.1 mm screw

  • Three 1.3 mm screws

  • During reassembly, be careful not to overtighten these screws, or your home button may not work.

Rimuovi le quattro viti tri-wing Y000 che fissano la staffa sopra il sensore home/Touch ID:

Una vite da 1,1 mm

Tre viti da 1,3 mm

In fase di rimontaggio, stai attento a non serrare troppo queste viti, altrimenti il pulsante home potrebbe non funzionare.

Your contributions are licensed under the open source Creative Commons license.