Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 6 guides that include this step.

English
German

Translating step 1

Step 1
Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:
  • Remove the four Y000 screws securing the bracket over the home/Touch ID sensor:

  • One 1.1 mm screw

  • Three 1.3 mm screws

  • During reassembly, be careful not to overtighten these screws, or your home button may not work.

Entferne die vier Y000 Schrauben, mit der die Abdeckung des Home / Touch ID-Sensors befestigt ist:

Eine 1,1 mm Schraube

Drei 1,3 mm Schraube

Überdrehe beim Zusammenbau diese Schrauben nicht, sonst funktioniert dein Home Button nicht.

Your contributions are licensed under the open source Creative Commons license.