Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
German

Translating step 7

Step 7
Place the device on its front. Loosen the four 12mm Phillips screws in the four corners with a J1 screwdriver.
  • Place the device on its front.

  • Loosen the four 12mm Phillips screws in the four corners with a J1 screwdriver.

  • Loosen the two 8mm Phillips screws in the center with a J1 screwdriver.

  • These screws are difficult to reach and will require a screwdriver extension piece.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.