Skip to main content
English
Dutch

Translating step 15

Step 15
Insert the leads of the 1 µF capacitor through the holes indicated in step 7. The capacitor will have markings on it indicating its capacitance. The direction of the capacitor does not matter.
  • Insert the leads of the 1 µF capacitor through the holes indicated in step 7. The capacitor will have markings on it indicating its capacitance. The direction of the capacitor does not matter.

  • Be sure to route the leads so that they do not cover any needed holes from step 7 or 8. Also, do not allow the leads to contact the leads of other components.

  • Solder the capacitor to the PCB and clip off the excess leads.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.