Skip to main content
English
Dutch

Translating step 11

Step 11
Place the pins of the voltage regulator through the holes indicated in step 7. Adjust the pins if necessary. There should be just a small portion of the pin sticking up through the top side of the PCB. If the pins do not stick through the board, adjust the pin bends so that they do.
  • Place the pins of the voltage regulator through the holes indicated in step 7. Adjust the pins if necessary.

  • There should be just a small portion of the pin sticking up through the top side of the PCB. If the pins do not stick through the board, adjust the pin bends so that they do.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.