Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

English
Spanish

Translating step 5

Step 5
The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
  • The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

  • Use the sharp end of a spudger to disconnect the speaker cable connector.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.