Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Spanish

Translating step 11

Step 11
Rotate the printer 90 degrees counter clockwise. Remove the cable connecting the ink cartridge carriage to the main circuit board.
  • Rotate the printer 90 degrees counter clockwise.

  • Remove the cable connecting the ink cartridge carriage to the main circuit board.

  • Pull straight up to free the cable from the main circuit board. Do not twist or wiggle the cable as doing so can damage it.

  • You may need to lift the carriage up with one hand in order to reach the cable with the free hand as shown.

Rota la impresora 90 grados a la izquierda.

Remueve el cable que conecta el carro de impresión a la placa principal.

Tira hacia arriba del cable desde la placa principal. No lo dobles o retuerzas; podrías dañarlo.

Puede que necesites levantar el carro hacia arriba con una mano para alcanzar el cable con tu mano libre, como se muestra.

Your contributions are licensed under the open source Creative Commons license.