Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 5

Step 5
Remove the two T10 12 mm Torx screws. Lift the support frame off of the printer body with both hands.
  • Remove the two T10 12 mm Torx screws.

  • Lift the support frame off of the printer body with both hands.

Entferne die beiden 12 mm Torx T10 Schrauben.

Hebe den Trägerrahmen mit beiden Händen vom restlichen Gerät weg.

Your contributions are licensed under the open source Creative Commons license.