Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Spanish

Translating step 4

Step 4
Remove the power button circuit board from the support frame by pinching the left side, and pulling forward and to the left simultaneously. Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.
  • Remove the power button circuit board from the support frame by pinching the left side, and pulling forward and to the left simultaneously.

  • Push up on the tab holding the secondary control circuit board with the spudger and pull it forward to remove it.

  • Be careful not to pull too hard on the cable connecting the power button control circuit board and the secondary control circuit board to the main circuit board

Remueve la placa de circuito del botón de encendido de su soporte agarrándolo del lado izquierdo, y tirando hacia adelante y a la izquierda simultáneamente.

Presiona la pestaña que contiene la segunda placa de circuitos con el spudger y tira hacia adelante para removerla.

Ten cuidado de no tirar demasiado fuerte del cable que conecta ambas placas a la principal.

Your contributions are licensed under the open source Creative Commons license.