Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 2

Step 2
Rotate the Printer 90 degrees counter clockwise. Remove the scanner cable from the main circuit board.
  • Rotate the Printer 90 degrees counter clockwise.

  • Remove the scanner cable from the main circuit board.

  • Grasp the bottom of the cable and pull straight up. Do not wiggle it from side to side or twist it as this can damage the connection.

Drehe den Drucker 90° gegen den Uhrzeigersinn.

Löse das Scannerkabel von der Hauptplatine.

Fasse das Kabel ganz unten an und ziehe gerade nach oben. Wackle nicht hin und her oder verdrehe es, dadurch kann der Kontakt schlecht werden.

Your contributions are licensed under the open source Creative Commons license.