Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
German

Translating step 1

Step 1
Set aside the top panel of the printer. Remove the two T10 12 mm Torx screws from the top front of the printer
  • Set aside the top panel of the printer.

  • Remove the two T10 12 mm Torx screws from the top front of the printer

Lege die obere Abdeckung des Druckers zur Seite.

Entferne die beiden 12 mm Torx T10 Schrauben vorne am Drucker.

Your contributions are licensed under the open source Creative Commons license.