Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.


Translating step 6

Step 6
Remove the two T10 12 mm Torx screws.
  • Remove the two T10 12 mm Torx screws.

  • Do not attempt to lift the top panel off the printer yet because it is still connected to the printer body by a cable.

Remueve los dos tornillos Torx T10 de 12 mm.

No intentes levantar el panel superior todavía, porque aún está conectado al cuerpo de la impresora por un cable.

Your contributions are licensed under the open source Creative Commons license.