Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Japanese

Translating step 3

Step 3
Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone.
  • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

  • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

スパッジャーの先端を使って、ロジックボード上のソケットからバッテリーコネクターを引き上げます。

引き上げた後、コネクターケーブルをわずかにソケットから反対側に曲げて固定します。ソケットに接触して電話本体に電源が入ることがないように防止することができます。

Your contributions are licensed under the open source Creative Commons license.