Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Dutch

Translating step 1

Step 1
Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:
  • Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:

  • Three 1.2 mm screws

  • One 2.6 mm screw

Verwijder de volgende vier tri-point Y000 schroeven die het plaatje op de onderste schermkabel aan het logic board bevestigen:

Drie 1.2 mm schroeven

Eén 2.6 mm schroef

Your contributions are licensed under the open source Creative Commons license.