Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Japanese

Translating step 1

Step 1
Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:
  • Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:

  • Three 1.2 mm screws

  • One 2.6 mm screw

ロジックボードに留められたディスプレイケーブルブラケットの下部から次の4本のトライウイングY000ネジを取り外します。

1.2 mmネジー3本

2.6 mmネジー1本

Your contributions are licensed under the open source Creative Commons license.