Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Italian

Translating step 1

Step 1
Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:
  • Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:

  • Three 1.2 mm screws

  • One 2.6 mm screw

Rimuovi le seguenti quattro viti tri-wing Y000 che fissano la staffa inferiore del cavo del display alla scheda logica:

Tre viti da 1,2 mm

Una vite da 2,6 mm

Your contributions are licensed under the open source Creative Commons license.