Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

English
Spanish

Translating step 1

Step 1
Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:
  • Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:

  • Three 1.2 mm screws

  • One 2.6 mm screw

Retira los siguientes cuatro tornillos Y000 de tres puntos que sujetan el soporte del cable de la pantalla inferior a la placa lógica:

Tres tornillos de 1.2 mm

Un tornillo de 2.6 mm

Your contributions are licensed under the open source Creative Commons license.