Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 16 guides that include this step.

English
Italian

Translating step 9

Step 9
Pull the display assembly slightly away from the top edge of the phone to disengage the clips holding it to the rear case. Open the iPhone by swinging the display up from the left side, like the back cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.
  • Pull the display assembly slightly away from the top edge of the phone to disengage the clips holding it to the rear case.

  • Open the iPhone by swinging the display up from the left side, like the back cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

Tira il gruppo display allontanandolo lievemente dal bordo superiore del telefono per sfilare le clip che lo fissano al case posteriore.

Apri l'iPhone inclinando il display e sollevandolo dal lato sinistro, come si farebbe con la quarta di copertina di un libro.

Non cercare già ora di separare completamente il display, perché questo è collegato alla scheda logica dell'iPhone con diversi fragili cavi piatti.

A questo punto puoi posare il telefono su una superficie piatta come se fosse un libro aperto.

[* black] Pull the display assembly slightly away from the top edge of the phone to disengage the clips holding it to the rear case.
[* black] Open the iPhone by swinging the display up from the left side, like the back cover of a book.
[* icon_caution] Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.
[* icon_note] At this point you may lay the phone down on a flat surface like an open book.

Your contributions are licensed under the open source Creative Commons license.