Skip to main content
English
Spanish

Translating step 8

Step 8
With the new camera out of the way, we work our way deeper into the 7. Next out: the audio baffle that thinks it's a headphone jack. Teardown Update: According to Apple, this plastic component is a barometric vent. With the added ingress protection afforded by the watertight seal, the iPhone uses this baffle to equalize the internal and atmospheric pressures in order to have an accurate altimeter.
  • With the new camera out of the way, we work our way deeper into the 7.

  • Next out: the audio baffle that thinks it's a headphone jack.

  • Teardown Update: According to Apple, this plastic component is a barometric vent. With the added ingress protection afforded by the watertight seal, the iPhone uses this baffle to equalize the internal and atmospheric pressures in order to have an accurate altimeter.

  • This Taptic Engine takes advantage of its extra legroom, sizing up for its home button haptic duties.

  • With the path cleared, we use our handy spudger to release the adhesive from beneath the battery. We wind up and peel out the three battery pull tabs.

Con la nueva cámara fuera de nuestro camino, vamos a ir más adentro del iPhone 7.

Ahora sacamos: el deflector de sonido que se cree ser un conector de audifonos.

Actualización de Desmontaje: Según Apple, este componente plástico es una apertura barométrica. Con la proteccion de acceso integrada que ofrece sellado hermético, el iphone usa este deflector para igualar las presiones tanto interna como la atmosférica con el fin de tener un altímetro preciso.

Este Motor Táptico toma ventaja de su largo cuerpo, dimensionado para la función háptica del botón de inicio.

Con el camino despejado, usaremos nuestra herramienta spudger para liberar el adhesivo que se encuentra debajo de la batería. Sacamos y despegamos las tres lengüetas de la batería.

Your contributions are licensed under the open source Creative Commons license.