Skip to main content

Fix Your Stuff

Right to Repair

Store

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
French

Translating step 1

Step 1
Using a Torx #9 screw driver, remove the two 8.77mm screws holding the drive's shield onto your iMac G4. Remove the drive shield from your iMac.
  • Using a Torx #9 screw driver, remove the two 8.77mm screws holding the drive's shield onto your iMac G4.

  • Remove the drive shield from your iMac.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.