Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 5

Step 5
Use the edge of the SSD connector to put a 90 degree downward bend in the cable along the first large dotted line. Bend the ribbon cable back up 90 degrees along the second large dotted line.
  • Use the edge of the SSD connector to put a 90 degree downward bend in the cable along the first large dotted line.

  • Bend the ribbon cable back up 90 degrees along the second large dotted line.

Mediante il bordo del connettore SSD, piegare il cavo di 45 gradi verso il basso, lungo la prima grande linea tratteggiata.

Piegare nuovamente il cavo piatto di 45 gradi verso l'alto, lungo la seconda grande linea tratteggiata.

Your contributions are licensed under the open source Creative Commons license.