Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Italian

Translating step 4

Step 4
Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets. Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.
  • Bend the ribbon cable along the dotted lines to help the connectors remain seated in their sockets.

  • Bend the ribbon cable 90 degrees at the SSD connector so that it is parallel to the connector.

Piegare il cavo piatto lungo le linee tratteggiate per fare in modo che i connettori restino in posizione nei rispettivi connettori femmina.

Piegare il cavo piatto di 90 gradi presso il connettore dell'SSD affinché sia parallelo al connettore stesso.

Your contributions are licensed under the open source Creative Commons license.