Skip to main content
English
Italian

Translating step 1

Step 1
Unlike the X360 Power Brick, these rubber boots require no tools to pry them up. Simply get your fingernails underneath and gently pull them up. Several people have commented that these boots were much more challenging to remove than mine were. Remove the 4 screws with your T10 security bit driver.
Remove Rubber Boots
  • Unlike the X360 Power Brick, these rubber boots require no tools to pry them up. Simply get your fingernails underneath and gently pull them up.

  • Several people have commented that these boots were much more challenging to remove than mine were.

  • Remove the 4 screws with your T10 security bit driver.

A differenza dell'alimentatore della Xbox 360, non è richiesto alcun attrezzo per staccare questi piedini di gomma. Basta mettere le unghie sotto di essi e tirarli delicatamente verso l'alto.

Diverse persone hanno commentato che questi piedini erano molto più impegnativi da rimuovere di quanto lo fossero i miei.

Rimuovi le 4 viti usando un cacciavite Toorx T10 con foro centrale di sicurezza.

Your contributions are licensed under the open source Creative Commons license.