Skip to main content
English
German

Translating step 2

Step 2
The blaster is relatively easy to take apart. Just remove the Phillips #0 screws from the body. Remove the 8 screws from the rear body. They're all the same size.
Rear body screws.
  • The blaster is relatively easy to take apart. Just remove the Phillips #0 screws from the body.

  • Remove the 8 screws from the rear body. They're all the same size.

  • Remove the screw below the barrel. This is the only screw that's a different size. It's quite a bit longer than the others.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.